|
TEX
THICKENER
|
PROPERTIES
:
|
| 1.
Appearance |
:
Milky white, thin emulsion |
| 2.
Composition |
:
Acrylic Copolymer |
| 3.
% Non-volatile |
:
30 +/- 2 |
| 4.
Viscosity of the emulsion |
:
less than 0.2 |
| |
|
SUGGESTED
PROCEDURE FOR USING TEX THICKENER
|
| PIGMENT
PRINTING (for Partial Replacement of Kerosene / MTO) |
Travel rebate
Find best beauty coupons at beautycouponcodes
nong shim at eFoodDepot.com
schrank als deiser kleiderspind sofort hier bestellen
TEX THICKENER replaces nearly 30-50% pf kerosene of mineral
turpentine from the emulsion thickening used for the printing
of pigment or reactive colours without affecting the fastness
or brightness of the print. Further, there is also a reduction
in the quantity to the gum, CMC etc. used conventionally.
A general formulae is given as a guideline for using TEX
THICKENER in pigment printing of textiles for achieving
kerosene replacement. |
| |
RECIPE
FOR PIGMENT PRINTING
|
| Water
|
37-35
parts |
| Tex
Binder |
10
parts |
| Tex
Thickener |
2-3
parts |
| Ammonia
Solution(15%) |
1-2
parts |
| Urea
|
4
parts |
| Catalyst
DAP or LCP |
1
part |
| Kerosene
/ MTO |
45
parts |
| Total
|
100
parts |
| Thickening
paste is made using the above recipe with high speed stirring
as per normal process and adequate quantities of pigments
are added and printing, drying and curing are carried
out as per standard process. |
| NOTE
: The information given above is offered as true and accurate
to the best of our knowledge but without guarantee.
|
